Products Category
Home > MicroscopePolarizing Microscope > XSP-P4 microscope

Polarizing microscope XSP-P4 serial can observe mineral crystal figure, color and interference color and also identify its optical performance. It is a good microscope used in geology, petroleum, coal, Chemical fiber, medical treatment and physic inspection. It is also widely used in academic demonstration and research.

Features:

0°-90° Rotatable Analyzer and when out of optical path, Single Polarizing Observation is Available. With Bertrand,
Interferogram of Specimen can be observed clearly.

λ Slip1/4λ Slip and Quartz Wedge are Equipped

Revolving round stage Φ145mm, 360°rotatable and graduated in 1° increments, minimum resolution 6when using vernier scale

Polarizer can be Swung out of Optical Path6V/20W Halogen Lamp Illumination, Brightness Adjustable

Specification

 

 

XSP-P4M

XSP-P4P

XSP-P4

Viewing Head

Monocular head inclined at 30°, 360°rotatable

 

 

Compensation free binocular head inclined at 30°, 360° rotatable

 

 

Compensation free trinocular head inclined at 30°, 360° rotatable

 

 

Eyepiece

Eyepiece WF10× /18with scale of crosshair

Eyepiece WF10×/18

 

Objective

Strain free achromatic objective 4×10×40×60×

Nosepiece

Backward quadruple nosepiece

Analyzer

Rotatable analyzer with gradation 0°-90°

Bertrand Lens

Bertrand lens, sliding in/out of optical path

Optical Compensator

λ Slip (first class red)1/4λ Slip quartz wedge

Revolving Round Stage

Diameter Φ145mm, 360° rotatable and graduated in 1°increments, minimum resolution 6‘ when using venire scale, center adjustable

Condenser

Abbe condenser NA1.25 with iris diaphragm & filter

Focusing

Coaxial coarse & fine adjustment, range28mm, fine division 0.002

Polarizer

Sliding in/out of optical path, located on the top of collector

Illumination

6V/ 20W Halogen lamp, brightness adjustable

Note: “●” in the table is standard attachment. “○” is optional accessories.

Design change: To keep pace with technological advances, we have reserved the right to
make design modification and changes without notice.